SPECIFICATIONS

Series S-S Access Door

STANDARD WITH SPRING ASSIST

Specifications (bullet form)

• Cover Leaf(s): 1/4" (7mm) aluminum diamond plate.
• Angle Frame: 1/4" (7mm) aluminum with continuous anchor flange.
• Frame Coating: Bituminous coating where in contact with concrete.
• Load Rating: 300 lbs. psf (1464 kg. psm) uniform live load.
• Locking System: Type 316 stainless steel slam lock with removable key.
• Cover equipped with the following stainless steel features: spring assists, T-316 tamper proof attaching hardware, automatic T-316 hold open arm with aluminum latch.
• Cushion / Gasket: neoprene.
• Guarantee: Access covers shall carry a lifetime guarantee against defects in material and/or workmanship.

Specifications (paragraph form)

The S1S (single leaf) and S2S (double leaf) series access frames and covers as manufactured by Halliday Products, Inc. of Orlando, Florida shall have a 1/4" (7mm) thick one-piece, mill finish, extruded aluminum frame, incorporating a continuous concrete anchor. A bituminous coating shall be applied to the frame exterior where it will come in contact with concrete. Door panel shall be 1/4" (7mm) aluminum diamond plate, reinforced to withstand a live load of 300 lbs. psf (1464 kg. psm). Uniform live load. Doors shall open to 90 degrees and automatically lock with a T-316 stainless steel hold open arm with aluminum release handle. For ease of operation, the hold open arm shall incorporate an enclosed stainless steel compression spring assist. Doors shall close flush with the frame and rest on a built-in neoprene cushion/gasket. Hinges and all fastening hardware shall be T-316 stainless steel. Unit shall lock with a T-316 stainless steel slam lock with removable key and have a non-corrosive handle. Unit shall carry a lifetime guarantee against defects in material and/or workmanship.