• ​

  

  (800) 298-1027

  

  Message Us

  Our Company

  Products

  Recent Projects

  News

  Manuals & Warranty

  ARRA Info

  Contact Us

SPECIFICATIONS

Series H-C Access Door

HEAVY DUTY CHANNEL FRAME - H20

Specifications (bullet form)

• Cover Leaf (s): 1/4" (7mm) aluminum diamond plate and shall not protrude into the frame when the cover is in the open position.
• Channel Frame: 1/4" (7mm) aluminum with continuous anchor flange and a 1-1/2 inch (38 mm) drainage coupling located in the front left corner of frame.
• Load Rating: H-20, uniform live load.
• Locking System: Type 316 stainless steel slam lock with removable key.
• Cover equipped with the following stainless steel features: spring assists, T-316 heavy duty hinges, T-316 tamper proof attaching hardware, automatic T-316 hold open arm with aluminum latch.
• Guarantee: Access covers shall carry a lifetime guarantee against defects in material and/or workmanship.

Specifications (paragraph form)

The HIC (single leaf) and H2C (double leaf) series access frames and covers as manufactured by Halliday Products, Inc. of Orlando, Florida shall have a 1/4 inch (7mm) thick, mill finish, extruded aluminum channel frame, incorporating a continuous concrete anchor. A 1-1/2 inch (38mm) drainage coupling shall be located in the front left corner of the channel frame. The entire frame must be supported by a full bed of Class A concrete. The door panels shall be 1/4" (7mm) aluminum diamond plate reinforced to withstand a live load of the H-20 Uniform live load, and shall not protrude into the channel frame when in the open position. Doors shall open to 90 degrees and automatically lock with a T-316 stainless steel hold open. For ease of operation, doors shall incorporate enclosed stainless steel compression spring assists. Doors shall close flush with the frame. Hinges and all fastening hardware shall be T-316 stainless steel. Unit shall lock with a T-316 stainless steel slam lock with removable key and have a non-corrosive handle. Unit shall carry a lifetime guarantee against defects in material and/or workmanship.