Slide & Stop Gates - SERIES G,N
The slide gate assemblies shall be manufactured by Halliday Products, Inc. Orlando, Florida. The frame shall be a one-piece 1/4" (7mm) thick 6061-T6 aluminum extrusion with a continuous embed or mounting flange as required. The aluminum frame shall incorporate a one-piece extruded polymer channel liner. The handwheel shall be 16" (406mm) diameter cast aluminum and work in conjunction with a brass lifting nut and 1 1/8" (29mm) diameter stainless steel triple lead acme rod, requiring a maximum of 16 turns for one foot (305mm) of travel. All hardware shall be stainless steel. The lifting nut shall be provided with a grease fitting for ease of lubrication. Polymer bearing pads shall be incorporated above and below the brass nut. The gate shall be 1/4" (7mm) thick 6061-T6 aluminum and reinforced to deflect no more than 1/360th of the span. The handwheel, gate, and stem shall be removable. Unit shall be guaranteed against defects in material and/or workmanship for a period of 3 years.
Let's make your project happen!
6401 Edgewater Drive Orlando, FL 32810
To receive your free electronic or printed catalog
register here »
CIGNA COVERAGE TRANSPARENCY
Copyright © 2008-2016 Halliday Products.
All Rights Reserved.
Site designed by Kim Parrish Creative Services