SPECIFICATIONS

Mixer Mast

4-inch

The Halliday Products mixer mast assemblies shall be manufactured in T-304 or T-316 stainless steel and shall be sized at the factory to fit the tank depth. The mast shall be 4" (102mm) square tube with a 1/8" (3mm) wall thickness and shall accommodate the mixer sliding bracket. The mast shall be supplied with factory welded rotation sockets at the top, bottom and intermediate levels and shall work in conjunction with wall mounted brackets that secure the unit to the tank wall with 5/8-in. x 6-in. stainless steel wedge anchor bolts. Each socket shall be lined with a Kynar® insert to insure easy mast rotation and shall be spaced at a maximum of 10-ft. (3 meters) intervals. The mast assembly shall be supplied with a positioner plate to facilitate mixer directioning. The positioner plate shall have a minimum of 14 settings with a total of 167 degrees of rotation. The mast assembly shall include a lined hoist socket, static cable assembly, and a pivoting base bracket designed to allow for slope in the tank floor. If required, a wall bracket extension shall be supplied by the mast manufacturer and shall be custom fit to insure a straight and true installation.

Mixer Mast

2-inch

The Halliday Products mixer mast assemblies shall be manufactured in T-304 or T-316 stainless steel and shall be sized at the factory to fit the tank depth. The mast shall be 2" (51mm) square tube with a 1/8" (3mm) wall thickness and shall accommodate the mixer sliding bracket. The mast shall be supplied with factory welded rotation sockets at the top, bottom and intermediate levels and shall work in conjunction with wall mounted brackets that secure the unit to the tank wall with 5/8-in. x 6-in. stainless steel wedge anchor bolts. Each socket shall be lined with a Kynar® insert to insure easy mast rotation and shall be spaced at a maximum of 10-ft. (3 meters) intervals. The mast assembly shall be supplied with a positioner plate to facilitate mixer directioning. The positioner plate shall have a minimum of 10 settings with a total of 162 degrees of rotation. The mast assembly shall include a lined hoist socket, static cable assembly, and a pivoting base bracket designed to allow for slope in the tank floor. If required, a wall bracket extension shall be supplied by the mast manufacturer and shall be custom fit to insure a straight and true installation.